River pebbles, pebbles, limestone, granite, quartz sand, natural sand, machine sand, river sand, etc.
Applications:Widely used in construction sites, sand and gravel fields, glass factories, power stations, concrete and stone, and electric fields.
The spiral sand washing machine produced by our factory is a kind of spiral washing equipment, which can clean the stone powder soil in the sand and gravel. Its novel sealing structure and reliable transmission device ensure the effect of cleaning and dewatering. It is a kind of high efficiency sand washing equipment used with the sand machine. Spiral sand washing machine is widely used in many kinds of industries, such as construction site, sand stone factory and concrete dam site of hydropower station. It has high cleanliness, reasonable structure, large amount of treatment, low power consumption and less sand loss in the process of sand washing, especially the transmission part of spiral sand washing machine is isolated from water and sand, so its failure rate is much lower than the present. Commonly used sand washing machine is the choice of upgrading the domestic sand washing industry.
1. Large capacity, high cleaning rate, low power consumption, good sealing structure, fully enclosed transmission device and adjustable weir board.
2. The products are efficient, durable, clean and dehydrated, and the fine products remain stable.
3. Sand loss is less in sand washing process, especially the transmission parts of spiral sand washing machine are separated from water and sand.
4. The failure rate is much lower than the commonly used sand washing machine, and is the choice of upgrading the domestic sand washing industry.
When the spiral sanding machine works, the motor drives the impeller slowly through the triangle belt, the reducer and the gear reducer, and the sand and stone will enter the washing tank, roll it under the drive of the impeller and lapping each other to remove the impurities covering the gravel surface, and destroy the water vapor layer of the coated sand at the same time, in favor of dehydration; and adding water at the same time. Form strong water flow, remove impurities and small foreign matter in time, and discharge from the washing outlet of the overflow outlet to complete the cleaning effect. The clean sand and gravel are taken away from the blades, and finally the sand and gravel are poured into the discharge trough from the rotary impeller to complete the cleaning function of the sand and stone.
Model |
Diameter of spiral(mm) |
Length of water trough(mm) |
Rotary speed of spiral(r/min) |
Capacity(t/d) |
Power(kw ≤) |
Overall size(mm≤) |
Weight(t) |
||||
Sand return |
Over flow |
Driving |
Lifting |
Length |
Width |
Height |
≤ |
||||
FG-3 |
300 |
3000 |
12-30 |
80-150 |
20 |
1.1 |
---- |
3850 |
490 |
1140 |
0.7 |
FG-5 |
500 |
4500 |
8-12.5 |
135-210 |
32 |
1.1 |
---- |
5430 |
680 |
1480 |
1.9 |
FG-7 |
750 |
5500 |
6-10 |
340-570 |
65 |
3 |
---- |
6720 |
980 |
1820 |
3.1 |
FG-10 |
1000 |
6500 |
5-8 |
675-1080 |
110 |
5.5 |
---- |
7590 |
1240 |
2380 |
4.9 |
FC-10 |
8400 |
675-1080 |
85 |
7.5 |
---- |
9600 |
1240 |
2680 |
6.2 |
||
FG-12 |
1200 |
6500 |
4-6 |
1170-1870 |
155 |
7.5 |
2.2 |
8180 |
1570 |
3110 |
8.5 |
FC-12 |
8400 |
1170-1870 |
120 |
7.5 |
2.2 |
10370 |
1540 |
3920 |
11.0 |
||
2FG-12 |
6500 |
2340-3740 |
310 |
15 |
4.4 |
8230 |
2790 |
3110 |
15.8 |
||
2FC-12 |
8400 |
2340-3740 |
240 |
15 |
4.4 |
10370 |
2790 |
3920 |
17.6 |
||
FG-15 |
1500 |
8300 |
4-6 |
1830-2740 |
235 |
7.5 |
2.2 |
10410 |
1880 |
4080 |
12.5 |
FC-15 |
10500 |
1830-2740 |
185 |
7.5 |
2.2 |
12670 |
1820 |
4890 |
16.8 |
||
2FG-15 |
8300 |
2280-5480 |
470 |
15 |
4.4 |
10410 |
3390 |
4080 |
22.1 |
||
2FC-15 |
10500 |
2280-5480 |
370 |
15 |
4.4 |
12670 |
3370 |
4890 |
30.7 |
||
FG-20 |
2000 |
8400 |
3.6-5.5 |
3290-5940 |
400 |
11-15 |
3 |
10790 |
2530 |
4490 |
20.5 |
FC-20 |
12900 |
3210-5940 |
320 |
11-15 |
3 |
15610 |
2530 |
5340 |
28.5 |
||
2FG-20 |
8400 |
7780-11880 |
800 |
22-30 |
6 |
11000 |
4600 |
4490 |
35.5 |
||
2FC-20 |
12900 |
7780-11880 |
640 |
22-30 |
6 |
15760 |
4600 |
5640 |
48.7 |
||
FG-24 |
2400 |
9130 |
3.67 |
6800 |
580 |
15 |
3 |
11650 |
2910 |
4970 |
26.8 |
FC-24 |
14130 |
6800 |
490 |
18.5 |
4 |
16580 |
2930 |
7190 |
41.0 |
||
2FG-24 |
9130 |
13600 |
1160 |
30 |
6 |
12710 |
5430 |
5690 |
45.8 |
||
2FC-24 |
14130 |
13700 |
910 |
37 |
8 |
17710 |
5430 |
8000 |
67.9 |
||
2FG-30 |
3000 |
12500 |
3.2 |
23300 |
1785 |
40 |
8 |
16020 |
6640 |
6350 |
73.0 |
2FC-30 |
14300 |
23300 |
1410 |
---- |
---- |
17091 |
---- |
8680 |
84.8 |
Note: This is just reference. Please contact us to get price and details.
Service Support
Focus on Quality, Serve Worldwide
Whatever your requirements, you 'll find the perfect service-oriented solution to match your specific needs with our help.
Email: [email protected] Tel: 0086-371-86182763 Skype: [email protected]
Model |
Diameter of spiral(mm) |
Length of water trough(mm) |
Rotary speed of spiral(r/min) |
Capacity(t/d) |
Power(kw ≤) |
Overall size(mm≤) |
Weight(t) |
||||
Sand return |
Over flow |
Driving |
Lifting |
Length |
Width |
Height |
≤ |
||||
FG-3 |
300 |
3000 |
12-30 |
80-150 |
20 |
1.1 |
---- |
3850 |
490 |
1140 |
0.7 |
FG-5 |
500 |
4500 |
8-12.5 |
135-210 |
32 |
1.1 |
---- |
5430 |
680 |
1480 |
1.9 |
FG-7 |
750 |
5500 |
6-10 |
340-570 |
65 |
3 |
---- |
6720 |
980 |
1820 |
3.1 |
FG-10 |
1000 |
6500 |
5-8 |
675-1080 |
110 |
5.5 |
---- |
7590 |
1240 |
2380 |
4.9 |
FC-10 |
8400 |
675-1080 |
85 |
7.5 |
---- |
9600 |
1240 |
2680 |
6.2 |
||
FG-12 |
1200 |
6500 |
4-6 |
1170-1870 |
155 |
7.5 |
2.2 |
8180 |
1570 |
3110 |
8.5 |
FC-12 |
8400 |
1170-1870 |
120 |
7.5 |
2.2 |
10370 |
1540 |
3920 |
11.0 |
||
2FG-12 |
6500 |
2340-3740 |
310 |
15 |
4.4 |
8230 |
2790 |
3110 |
15.8 |
||
2FC-12 |
8400 |
2340-3740 |
240 |
15 |
4.4 |
10370 |
2790 |
3920 |
17.6 |
||
FG-15 |
1500 |
8300 |
4-6 |
1830-2740 |
235 |
7.5 |
2.2 |
10410 |
1880 |
4080 |
12.5 |
FC-15 |
10500 |
1830-2740 |
185 |
7.5 |
2.2 |
12670 |
1820 |
4890 |
16.8 |
||
2FG-15 |
8300 |
2280-5480 |
470 |
15 |
4.4 |
10410 |
3390 |
4080 |
22.1 |
||
2FC-15 |
10500 |
2280-5480 |
370 |
15 |
4.4 |
12670 |
3370 |
4890 |
30.7 |
||
FG-20 |
2000 |
8400 |
3.6-5.5 |
3290-5940 |
400 |
11-15 |
3 |
10790 |
2530 |
4490 |
20.5 |
FC-20 |
12900 |
3210-5940 |
320 |
11-15 |
3 |
15610 |
2530 |
5340 |
28.5 |
||
2FG-20 |
8400 |
7780-11880 |
800 |
22-30 |
6 |
11000 |
4600 |
4490 |
35.5 |
||
2FC-20 |
12900 |
7780-11880 |
640 |
22-30 |
6 |
15760 |
4600 |
5640 |
48.7 |
||
FG-24 |
2400 |
9130 |
3.67 |
6800 |
580 |
15 |
3 |
11650 |
2910 |
4970 |
26.8 |
FC-24 |
14130 |
6800 |
490 |
18.5 |
4 |
16580 |
2930 |
7190 |
41.0 |
||
2FG-24 |
9130 |
13600 |
1160 |
30 |
6 |
12710 |
5430 |
5690 |
45.8 |
||
2FC-24 |
14130 |
13700 |
910 |
37 |
8 |
17710 |
5430 |
8000 |
67.9 |
||
2FG-30 |
3000 |
12500 |
3.2 |
23300 |
1785 |
40 |
8 |
16020 |
6640 |
6350 |
73.0 |
2FC-30 |
14300 |
23300 |
1410 |
---- |
---- |
17091 |
---- |
8680 |
84.8 |