Roller washing machine

Applied Materials:

Various ore, Lime, etc.

Applications:

Widely used in a variety of difficult to wash large ore

Overview:

Roller washing machine Overview

 

The drum washing machine is divided into two types: cylindrical type and cylinder with grate bar type. The latter kind can divide the materials to be washed into two grades of +40mm and -40mm, and the -40mm can be further scrubbed by double spiral grooved washing machine to divide the materials into two grades of +2mm and -2mm. The washing efficiency can be Up to 98%, this combination is the most effective method for the current difficult to wash ore.

 

Know more about Fodamon Roller washing machine

 

1. The installation foundation is simple. Because the whole equipment is a box frame structure, there is only one flat floor and the sewage reuse sedimentation tank. The ground is best hardened for cleaning.
2. High integrity. Except for the finished material stacker belt conveyor, all the systems are integrated into a whole framework, which not only ensures the integrity of the equipment, but also leaves a moderate maintenance and inspection space, convenient and safe.
3. Working reliability. The core stone washing system adopts the mixing principle of the mixer. The raw materials are rolled, pushed and rubbed by the continuous spiral blades in the mixing drum. The stone materials can be separated by soaking and rubbing in a short time, and the sludge content can be less than 0.5% before the stone is discharged.4. Use economy. Storage hopper capacity up to 8M, so that the loader reasonable arrangement of the main equipment (such as mixing station) and the loading time of the stone washing machine, to avoid the loader in different feeding points and frequent shifts between raw materials, hopper mouth width of 3.2 meters, but also easy loading loader, reduce labor intensity.

 

Working principle

 

Roller stone washing machine is to use mechanical equipment to clean the raw stone, in order to ensure the quality requirements of the project at the same time to ensure that there is sufficient productivity to meet the concrete mixing station stone supply. Its working process is generally: raw material storage, transportation, cleaning, finished material transportation, sewage sedimentation and reuse; raw material storage is generally a hopper, the hopper requirements can be used ZL50 loader feeding, hopper mouth feeding width should be greater than 3 meters, hopper capacity depends on the height of loader feeding, transport height, raw material flow angle and other conditions, the more. The bigger the better. Raw material conveyor generally uses belt conveyor, according to raw material mud content bucket mouth had better set throttle device to control the amount of cleaning. Because of the small amount of mud and dust attached to the stones from quarries, the cleaning process need not be too long. The key is not to add the dirty water from the tank when the stones are cleaned and discharged, but to form the secondary pollution of the stones. The finished stone is usually conveyed to the finished product storage area or hopper by belt conveyor for use, so it is better to shield the storage area or wash it now. No matter what type of stone washing machine will produce a large amount of sewage and water consumption is almost the same. Considering the environmental requirements, generally set up a sewage sedimentation and reuse tank, determine the tank volume and sedimentation level according to the output, and consider the mechanical or manual cleaning of sludge.

 

Technical data

 

Model

1242

1542

1842

2042

2242

Diameter of roller(mm)

1200

1500

1800

2000

2200

Length of roller(mm)

3000

4200

4200

4200

4200

Rotary speed of spiral(r/min)

12-15

10-13

10-12

9-11

8.3-10.5

Feeding size(mm)

40

60

80

110

150

Capacity(t/h)

20-40

40-60

60-80

100-150

130-200

Power(kw)

11

15

18.5

22

22

 Note: This is just reference. Please contact us to get price and details.


Service Support


Focus on Quality, Serve Worldwide
Whatever your requirements, you 'll find the perfect service-oriented solution to match your specific needs with our help.
Email: [email protected]  Tel: 0086-371-86182763  Skype: [email protected] 
After-sale Service-FDM MACHINERY.jpg

Application

Model

1242

1542

1842

2042

2242

Diameter of roller(mm)

1200

1500

1800

2000

2200

Length of roller(mm)

3000

4200

4200

4200

4200

Rotary speed of spiral(r/min)

12-15

10-13

10-12

9-11

8.3-10.5

Feeding size(mm)

40

60

80

110

150

Capacity(t/h)

20-40

40-60

60-80

100-150

130-200

Power(kw)

11

15

18.5

22

22

Copyright © 2018.Fodamon All rights reserved Links: Fodamon sitemap